YTX Cylinder Stone Washing Machine
YTX Series Cylinder Stone Scrubber is mainly used in sandstone washing and aggregate washing. This machine has large size feed material and is able to keep the silt content of washed aggregates low to 0.5% and moisture content less than 2%, suitable for washing lump ores that are hard to clean. Generally, this series of ore washer consists of cylinder type and type of cylinder with grizzly bars
Descripción del producto
Introducción del producto:
YTX Series Cylinder Stone Scrubber is mainly used in sandstone washing and aggregate washing. This machine has large size feed material and is able to keep the silt content of washed aggregates low to 0.5% and moisture content less than 2%, suitable for washing lump ores that are hard to clean. Generally, this series of ore washer consists of cylinder type and type of cylinder with grizzly bars
Principio de funcionamiento
Washing barrel is supported by four tug supports, which is rotated by motor driven at the low speed. The aggregate with mud pie and stone powder from feed opening into the rotating drum, continuously brought along and thrown away by rubber wearing plate installed with certain angle in washing barrel, circulated many times during moving process from feed side to discharge end, and washed by straightforward or sensereversing rinse water. Finally, the clean aggregates are discharged after being sieved and dehydrated by shaft screen at discharged end, and the waste water with sludge is discharged from the baffle with hole at discharge end or feed end.
Empaquetado y entrega
Product should be processed to be rustproof and moisture proof before delivery. The small parts are packed into wooden crates; the big parts are wrapped by plastic sheeting.
Garantía
100% brand new when leaving the factory. The seller guarantee quality of the machines (excluding wearing parts)for a period of one year from the date of trial run finish under our technician's guidance, but not exceed 15 months from date on which machine leaves the factory.
Características del producto
Especificación técnica
Modelo |
Dia. × Length(m×m) |
Max. Material Size(mm) |
Capacidad(t / h) |
Barrel Speed(r / min) |
Fuerza de motor(kw) |
YTX1530 |
Φ1.5 × 3.0 |
50 |
70-140 |
30 |
55 |
YTX1836 |
Φ1.8 × 3.6 |
80 |
120-200 |
25 |
75 |
YTX2145 |
Φ2.1 × 4.5 |
150 |
180-250 |
21 |
110 |
YTX2450 |
Φ2.4 × 5.0 |
200 |
230-300 |
18 |
160 |
YTX2760 |
Φ2.7 × 6.0 |
250 |
280-420 |
16 |
220 |
YTX3075 |
Φ3.0 × 7.5 |
300 |
400-500 |
15 |
2 × 185 |
Preguntas Frecuentes
1. How long is the delivery time of your YTX Cylinder Stone Washing Machine?
The delivery time is within 30 working days. But when the project is very big and the customers have special requirement on the equipment, the delivery would be extended.
2. What’s the minimum order quantity of your YTX Cylinder Stone Washing Machine?
1 set. Our service philosophy is to satisfy the needs of every client.
3. How long is the YTX Cylinder Stone Washing Machine warranty period?
Our equipment warranty period is 1 year. Wearing parts and problem caused by worker’s wrong operation are not included.
4. What’s the after sale service of your company?
We will provide foundation drawing to the clients for installation. Besides, we can provide installation service, workers training service, etc.
5. Can you provide wearing parts?
We have two casting factories that specialize in produce wearing parts for our clients. If your equipment are not manufactured by our company, please provide us the wearing parts drawing.
6. Can you give me a solution and quotation?
Of course, to provide accurate solution and quotation, please give us background information, including, raw material, the capacity, max. input size, dust content, the required clean degree of final products, etc.
Contacto
- Tel: +86-21-38226566
- Fax: + 86-21-38226266
- Correo electrónico de ventas: [email protected]
- Servicio de correo electrónico: [email protected] m
- Agregue: NO.135, 456 Block, Dieqiao Road, Pudong New District, Shanghai PRChina